Buy PCB's Kits and Components for Audio Amplifiers Pre Amps BT boards Power supplies solar charge controllers Vu Meters & electronics parts at best price
- (+91) 9424930058
- mypcbinfo@gmail.com
- Amphead Electro Works, Aashish Complex, Ward No. 03 NH-46, Itarsi, Itarsi, Madhya Pradesh, India. 461111
© 2020 MYPCB. All Rights Reserved
Search
TO - 220 Heat Sink Fitting Kit - Small
TO-220 TDA2030 TIP41 size heat sink fitting kit
This Kit Contains Below Items
Silicone Pad - 1
M3 Nut + Bolt Set - 1
M3 Plastic sleeve washer - 1
TDA7265 30W + 30 Watt Stereo Audio Power Amplifier IC
TDA7265 Home theater amplifier IC
Max Working - 25 Volts or +36v Single or Dual Supply
Max Power - 30 + 30 Watts
Package Type - Multiwatt11 Stereo Amplifier ic
3 RCA Male TO 3 RCA Male Shielded Cable for Audio and Video Applications
3 RCA Male TO 3 RCA Male Shielded Cable for Audio and Video Applications
3.5 mm Male Stereo to 2 RCA Shielded Audio Cable - 4 Feet Lenght Molded Connectors
3.5 mm Male Stereo to 2 RCA Shielded Audio Cable
4 Feet Lenght
Molded Connectors
3.5 mm Stereo to Stereo Shielded Audio Cable - 4 Feet Length Molded connectors
3.5 mm Stereo to Stereo Shielded Audio Cable
4 Feet Length
Molded connectors
104J 0.1uf 100nf MLC Capacitor - 2.5 mm Pitch General Purpose
104J 0.1uf 100nf MLCC Capacitor - 2.5 mm Pitch General Purpose
105J 1uf 63v Non Polar Metallized Polypropylene Film Capacitors
105J 1uf 63v Non Polar Capacitor
5% Tolerance, Pitch - 7.5mm Type - MKP
Metallized Polypropylene Film Type Capacitors
APPLICATIONS: Blocking, bypassing, filtering, coupling and
decoupling, interference suppression in low voltage application.
1N4148 100 Volt 150 mA Small Signal General Purpose Diode
1N4148 100 Volt 150 mA Small Signal General Purpose Diode - DO - 35 Package
Max Forward Rectified Current= 150 mA
Max Working Voltage = 100 Volts
Peak Forward Surge Current = 2 amps
Forward Voltage = 1 Volt
LM3914 LM3915 10 LED VU Meter Sound Level indicator - Assembled Board
Supply Voltage Range - +9 volts to +18 volts, +12 volt recommended
Battery Operation - can be run using +9v or +12v Battery.
Signal Input - Speaker Output to be connected parallelly in to Sig. IN connector, Adjust RV1 to required level.
LED's - 10 LED's of 3 mm or 5 mm can be used in this board.
12 Volt 100 Watts Compact Solar Charger / Charge Controller - Assembled Board
Solar Panel Support - 10 watt to 100 watts solar panels having Open Circuit Voltage - 17v to 24 volts DC, Max Current - 10 Amperes.
Charging Controller - Op - Amp Controlled P - Channel MOSFET , Linear Voltage Control Charging with LDO ( low drop out ) of 0.7 volts. High Efficiency.
Battery Support - 1 Ah to 60 Ah Lead Acid or Sealed Lead Acid ( SLA ) Battery, Ni -Cd Battery, Lithium Battery.
Adjustable Charging Voltage - Charging Voltage Can be adjusted by RV1 as per battery type and requirement.
Battery Condition indicators - 3 LED indicators for Charging , Low Battery and Fully Charged conditions.
50 Ampere Power Supply using KBPC5010 and 10000uf X 4 Capacitors for Hi-fi Audio Amplifiers - Assembled Board
High Performance - Heavy Duty KBPC5010 Bridge Rectifier
High Output Current - 50 Ampere Max , Capacitor Dia. � 35mm max.
PCB size - 150 mm x 75 mm (5.9 inch x 3 inch ), PCB Thickness - 1.6 mm.
Unregulated power supply - Capable of delivering high peak currents with low ripple as demanded by Amplifiers.
Amplifier usability - Designed for High power audio amplifiers.
Protection devices - fuses are provided on each supply rail for preventing burnout in case of fault or short circuit.��
12V Temperature Controlled Fan speed Controller Board - PWM / DC Fan Supported
12v Fan Controller using NTC and OP-amp
Max Fan Current = 1 Ampere
Fan voltage = 12 volts
PCB size = 55mm x 33mm
Supply required =12v AC 1 to 2 ampere
NTC Should be placed on the Heatsink for temperature reference
Preset R7 for adjusting idle speed
12 Volt 100 Watts Compact Solar Charger / Charge Controller Board - PCB only
Solar Panel Support - 10 watt to 100 watts solar panels having Open Circuit Voltage - 17v to 24 volts DC, Max Current - 10 Amperes.
Charging Controller - Op - Amp Controlled P - Channel MOSFET , Linear Voltage Control Charging with LDO ( low drop out ) of 0.7 volts. High Efficiency.
Battery Support - 1 Ah to 60 Ah Lead Acid or Sealed Lead Acid ( SLA ) Battery, Ni -Cd Battery, Lithium Battery.
Adjustable Charging Voltage - Charging Voltage Can be adjusted by RV1 as per battery type and requirement.
Battery Condition indicators - 3 LED indicators for Charging , Low Battery and Fully Charged conditions.
TDA7294 100 + 100 Watt Stereo Amplifier - High Power in Compact Size - Assembled Board with Heatsink
TDA7294 100 + 100 Watt Stereo Amplifier - High Power in Compact Size - Assembled Board with Heatsink
High Output - 100 + 100 watt RMS output power
Low Distortion - 0.1% Total Harmonic Distortion
Speaker usability - 4 & 8 ohms, 50 watt to 200 watt
Transformer - 24 0 24 VAC 5 to 10 Amperes
TDA7388 ic 45w x 4 Channel Audio Amplifier High power in compact size - Assembled Board
High Output - 45 watt x 4 RMS output power using 8 ohms speakers.
Low Distortion - 0.15% Total Harmonic Distortion.
Speaker usability - 4 & 8 ohms, Speakers can be used.
Supply voltage - 12 volts DC supply
Transformer Recommended - 12 0 12VAC 5 - 10 Ampere
Compact +12v -12v +5v Regulated Low Noise Compact size Power Supply for Audio Applications - Assembled Board
Low Noise and Ripple for Hi-fi Audio / Hobby Project use
Multiple Connectors for connecting up to 6 Boards
Output Voltages - +5 volt , +12 volts & -12 volts
Transformer Required - 12 0 12 VAC 1 - 2 Ampere
Compact size PCB board - 2.2 x 2.2 inch
Suitable for - Pre Amps, Bass Treble, Subwoofer, 3 way Active Filter Boards
TDA7294 100 +100 Watt Stereo Amplifier Board - High Power in Compact Size - PCB only
TDA7294 100 + 100 WATT Stereo
Low cost high power amplifier board
ICs Pin to Pin Compatible - TDA7293, TDA7294, TDA7295, TDA7296,
Compact size = fit in any box
Best for Subwoofers, Guitar amplifier & Home Audio systems
Working Voltage - 18 to 35 Volt DC
Transformer Recommended - 24 0 24 VAC 5 Ampere
TDA7294 100 + 100 Watt Stereo Amplifier - High Power in Compact Size - Assembled Board
TDA7294 100 + 100 Watt Stereo Amplifier - High Power in Compact Size - Assembled Board
High Output - 100� + 100 watt RMS output power�
Low Distortion - 0.1% Total Harmonic Distortion
Speaker usability - 4 & 8 ohms, 50 watt to 200 watt
Transformer - 24 0 24 VAC 5 to 10 Amperes�
Compact 12V / 15V +5v Regulated Low Noise Compact size Power Supply for Audio Applications - PCB only
Low Noise and Ripple for Hi-fi Audio / Hobby Project use
Multiple Connectors for connecting up to 6 Boards
Output Voltages - +5 volt , +12 / +15 volts & -12 / -15 volts
Transformer Required - 12 0 12 VAC / 15 0 15 VAC 1 - 2 Ampere
Compatible voltage Regulators - L7805 L7812 L7912 L7815 L7915
Suitable for - Pre Amps, Bass Treble, Subwoofer, 3 way Active Filter Boards
3 Way Active Crossover Filter Board, Low Mid High Frequency Output - PCB only
3 way active crossover based on Linkwitz/ Riley Filters
Separate High Mid and Low Output
High Signal Gain - 20 dB max�
RF Filter at input to Reduce unwanted Noise
Compatible IC's - NE5532 TL072 JRC4558 TL084 TL074 LM324
3 Way Active Crossover Filter Board, Low Mid High Frequency Output - Assembled Board
3 way Active Crossover Board based on Linkwitz / Riley Filters
Separate High Mid and Low Output
high performance IC's - NE5532 and TL084
High Signal Gain = 20 dB max
RF Filter at input to Reduce unwanted Noise
TL084 Quad JFET Input Low Noise Op - Amp
TL084 Four Channel Audio Operational Amplifier
Low Power Consumption: 1.4 mA/ch Typical
Output Short-Circuit Protection
Low Total Harmonic Distortion: 0.003% Typical
High Slew Rate: 13 V/s Typical
47K Dual Tone Volume / Potentiometer D shaft 6 pin - PCB mounting type
47k Dual Volume / Tone Pot
PCB / Panel Mounting Type
Heavy Duty Long life Potentiometer�
10A Unregulated & 1.5A Regulated Multiuse Power Supply 2200uf x 4 Capacitors - Assembled Board
Multiuse Regulated & Unregulated Power Supply Board
Regulated Supply - +5v, +12v, -12v Volts and 1.5 ampere Max
Using - L7805, L7812 & L7912
Transformer Recommended - 12 0 12 VAC 1 - 2 Amps
Unregulated supply - 10 Ampere Max Current 50 volts max
using GBU1010 Bridge Rectifier with 2200uf / 50v X 4 Capacitors
Transformer Recommended - 30 0 30 VAC max
One or Two Transformers Can be Connected
Versatile use - 2.1 Home Theater Systems, Subwoofer Amps, Benchtop Supply for Hobby projects.
10A Unregulated & 1.5A Regulated Multiuse Power Supply 4700uf x 4 Capacitors - PCB only
Multiuse Regulated & Unregulated Power Supply Board
Regulated Supply - +5v, +12v, -12v Volts and 1.5 ampere Max
Using - L7805, L7812 & L7912
Transformer Recommended - 12 0 12 VAC 1 - 2 Amps
Unregulated supply - 10 Ampere Max Current 50 volts max
using - GBU1010 Bridge Rectifier with 4700uf / 50v X 4 Capacitors
Transformer Recommended - 30 0 30 VAC max
One or Two Transformers Can be Connected
Versatile use - 2.1 Home Theater Systems, Subwoofer Amps, Benchtop Supply for Hobby projects.
TDA7265 TDA7292 2.1 Amplifier board for Home theater system & Car audio - PCB only
Subwoofer Low Pass Filter Board using NE5532 Op Amp - Easy to Make Hobby Kit
- Bass Boost - up 24 dB symmetrical curve Boost .
- High signal GAIN - 10dB signal GAIN to Drive Power Amplifiers.
- Universal amplifier usability - can be used with any amplifier made of IC or transistors.
- Supply + 12 volt DC Single supply required.
- Polarity Protection - Diode at power input to Protect against wrong power input.
Hi-fi Pre Amp & Bass Treble Board with Active Volume - Assembled Board
Active Volume Control - Linear and Better Performing then Passive Volume Controls
Hi fidelity stereo Bass Treble - 15dB Boost / Cut
Input Signal Gain - 20 dB max
Separate Op-Amp ic for Each Channel
Excellent channel separation, Minimum Cross talk
RF filter at input to reduce unwanted noise
On-board regulated power supply rectifier
Transformer Required - 12 0 12 VAC 1-2 ampere
Suitable for Amplifiers made of IC or transistors.
2.54 mm JST / Relimate Connectors for Easy Connection
Compact Size - 115 x 80 mm
Hi-fi Stereo Bass Treble with Gain Control and Active Volume - PCB only
Active Volume Control - Linear and Better Performing then Passive Volume Controls
Hi fidelity stereo Bass Treble - 15dB Boost / Cut
Input Signal Gain - 20 dB max
Separate Op-Amp ic for Each Channel
Excellent channel separation, Minimum Cross talk
RF filter at input to reduce unwanted noise
Compatible IC's - NE5532 JRC4558 TL072 NJM4560 LM833 OPA2160
Subwoofer Low pass Filter Board for Car & Home Audio systems - Assembled Board
Bass Boost - up 24 dB symmetrical curve Boost .
High signal GAIN - 10dB signal GAIN to Drive Power Amplifiers.
Universal amplifier usability - can be used with any amplifier made of IC or transistors.
Supply - + 12 volt DC Single supply required.
Polarity Protection -� Diode at power input to Protect against wrong power input.
Subwoofer Low Pass Filter Board with High Gain & Frequency Control - PCB only
Subwoofer Low Pass Filter Board Home theater systems & Car Audio
24dB Bass Boost.
Frequency Adjust via potentiometer
Compatible IC - NE5532, TL072, JRC4558, LM833, OPA2134
+ 12 volt DC Single supply required.
2 Pole Screw Terminal Block - 5 mm pitch XY126 - PCB Mount
2 Pole 5 mm pitch XY126 Screw Terminal
Current Rating - 10 A Max
Voltage Rating - 250v Max
Color May vary Depending on stock
Board to Wire Connector
TDA7265 30+30 Watt Stereo + 60 Watt Subwoofer 2.1 Amplifier Board 12v to 36v Single supply -Assembled Board
Output Power - 30 + 30 watt Stereo + 60 watt subwoofer*
Low Distortion - Less then 0.1% Total Harmonic Distortion*
Speaker usability - 4 & 8 ohms, 50 watt to 200 watt
Single Supply Circuit - 12v, 24v or 36v Also Runs on Battery or SMPS
BD140 PNP Medium Power Transistor - CDIL Make
BD140 PNP Medium-Power Transistors are designed for use as audio amplifiers and drivers
Max working Voltage = 80 volts,
Max Collector Current = 1.5 Amp
Max Power Dissipation = 12.5 Watts
Suitable for use in High Power Audio amplifiers & Home Theater Systems.
